Player Guide/CSAR and Salvage

CSAR SRS frequency: 30.00 FM. Tune here in your helo to coordinate with other rescuers and downed pilots. See SRS for setup.

How it works:

F10 layout: Personal / CSAR / CTLD / Salvage / Interrogation / Factory Menu.

The Rescue Duty toggle is in the Personal Menu. Most active rescue and salvage actions require Rescue Duty ON.

CSAR Menu

CSAR / SAR flow

1. Turn ON Rescue Duty (Personal Menu -> Toggle Rescue Duty).

2. Show Pickups on Map or List Active Pickups to find rescue markers.

3. Request Signal Flare / Request Smoke to localize a friendly survivor when needed.

4. Land near the survivor and use Pick up nearby rescue.

5. To move survivors toward a safer pickup, place a map mark with text: CSAR exfil. Nearby rescue locations move toward the mark.

6. Land near a friendly airbase and Offload Pickups.

UH-60 on CSAR duty -- ready to pluck your pilots out of the water if needed

UH-60 returning to the boat - survivors aboard.

Salvage Menu

Salvage flow

1. Show Salvage on Map (markers are separate from CSAR markers).

2. Salvage pickup requires a helicopter, Rescue Duty ON, and landing near the wreck.

3. Choose pickup amount: 250 kg / 500 kg / 1000 kg / All remaining.

4. Drop off to unload. Factory drop-offs and airbase drop-offs both pay but use different payout multipliers.

5. Coalition salvage credit feeds the salvage pot, which funds Factory production.

6. Emergency Jett! discards all onboard rescue/salvage payload.

7. Landing near a valid airbase or factory can auto-trigger offload after a short delay where enabled.

Interrogation Menu

Interrogation actions operate on captured RED pilots. They are fed by successful recovery and offload outcomes.